TMP102 TEMPERATURE SENSOR BREAKOUT BOARD
The TMP102 Temperature Sensor Breakout Board Quickly and easily connects the TMP102 to the Arduino Uno platform
Hardware Features:
- Uses the TMP102 Sensor from Texas Instruments
- 12-bit, 0.0625°C resolution
- Typical temperature accuracy of ±2.0°C
- +3.3V sensor
- Compatible with +3.3V or +5V Arduinos
This breakout board is based on the TMP102 Temperature Sensor chip from Texas Instruments. It can Measure the ambient temperature between -25℃ to +85℃. The temperature is measured with an accuracy of ± 2.0℃ across the temperature range. The TMP102 is capable of reading temperatures to a resolution of 0.0625°C
The board provides a convenient connection, via the I2C interface, to connect the TMP102 to an array of Arduino boards. It is compatible with both +3.3V and +5V Arduinos.
Coding the Arduino to measure the temperature from the TMP102 is made quite easy using the “Wire” library. All functions required to communicate with the sensor are included in the library. This docking board can be set up and displaying temperature in only a few minutes. See the TMP102 Temperature Sensor Breakout Board Project DVD below for an Arduino sketch that is complete and ready to take measurements.
Downloads
| 85-000010 | TMP102 Temperature Sensor Breakout Board User Manual | TMP102_TEMP_DOCK_UM.pdf |
| 95-000010 | TMP102 Temperature Sensor Breakout Board Data Sheet | TMP102_TEMP_DOCK_DS.pdf |
| 45-000010 | TMP102 Temperature Sensor Breakout Board Project DVD | TMP102_TEMP_SENSOR_PROJECT_DVD |
| 55-000010 | TMP102 Temperature Sensor Breakout Board Schematics |